KD16 Scraper Bridge
January 20, 2018
KD11 Belt Press, Pneumatic PN
January 20, 2018

KD16.11 Channel Brush

The channel brush model KD16.11 is meant for use in e.g. settling tanks in which it cleans the sides and bottom of the effluent channel as well as the sides of the overflow weir.

The suspension bracket makes it very easy to attach the brush to any peripherally driven scraper bridge model KD16.

The channel brush consists of a gear motor and a nylon brush that are mounted on a steering arm.

The steering arm can be lifted up and down by means of a winch and a counter weight. This makes it easy to move the brush back and forth between the surfaces to be cleaned. The steering arm covers 70° from one outer position to the other.

The channel brush is controlled by the control cabinet on the scraper bridge, which has been prepared for this.

[layerslider id="18"]

Technical specification

  • Power: 0.55 kW
  • Voltage / protection: 3 x 400 V, 50 Hz / IP55
  • Speed: 66 r/min
    • Contact KD Group about KD16.11 Channel Brush